shared this article
3 years ago

Knowledge Base


Memory dongle not working on Windows 8 & 10

The development of the memory belt feature is discontinued and is provided "as is".

On Windows 10 an old system file is missing. Download this DLL file “ftd2xx.dll” and unzip the folder and copy the ftd2xx.dll into the Sport Software application folder, normally located here: C:\Program Files (x86)\Activio AB\Activio Sport System\. Also make sure that the file “BM-USBDMEM.dll” is still present in the same application folder.

Make sure that the dongle is installed properly, instructions here. It should say something like "TI CC1111 Low-Power RF to USB CDC Serial Port (COMxx)" in the Device Manager. When you open the memory tool you need to open the "COM port" tab and press "Find" to set the proper com port.

Comments have been locked on this page!